A633 Carbon Steel Coil
A633 steel has four grades of A, C, D, and E. The thickness of grade C can reach 4 inches and the thickness of grade E can reach 6 inches. ASTM A633 steel specification is based on the standard specification for standardized high-strength low-alloy structural steel coil, which requires high notch toughness under low temperature conditions.
- Product Description
- Spot Warehouse
- Product Inspection
- Product Measurement
- Product Packaging
-
- Commodity name: A633 Carbon Steel Coil
A633 steel has four grades of A, C, D, and E. The thickness of grade C can reach 4 inches and the thickness of grade E can reach 6 inches. ASTM A633 steel specification is based on the standard specification for standardized high-strength low-alloy structural steel coil, which requires high notch toughness under low temperature conditions.
A633 Carbon Steel Coil Description
A633 carbon steel coil is a normalized high-strength low-alloy structural steel coil used for welded, riveted or bolted structures. This material is suitable for use at lower ambient temperatures where the required notch toughness is better than that expected for rolled materials of comparable strength. The material has good austenite grain size and should be normalized by heat treatment. Its chemical composition should be determined by thermal analysis. Tensile testing should also be performed. A633 steel coils are usually used in manufacturing plants, general construction and various types of engineering machinery, such as drilling rigs, electric shovels, electric wheel dump trucks, mining trucks, excavators, loaders, bulldozers, and various cranes for mining and various engineering constructions.
Product ParametersProduct Name
A633 Carbon Steel Coil
Production Process
Hot Rolling, Cold Rolling
Material Standards
AISI, ASTM, ASME, DIN, BS, EN, ISO, JIS, GOST, SAE, etc.
Width
45mm-2200mm
Length
Custom Size
Thickness
Hot Rolling: 2.75mm-100mm
Cold Rolling: 0.2mm-3mmDelivery Conditions
Rolling, Annealing, Quenching, Tempered or Standard
Surface Process
Ordinary, Wire Drawing, Laminated Film
Chemical Composition
A633
C
Mn
P
S
Si
V
Nb
Grade A
≤ 0.18
1.00-0.35
0.035
0.04
0.15-0.50
-
≤ 0.05
Grade C
≤ 0.20
0.15-0.50
0.035
0.04
0.15-0.50
-
0.01-0.05
Grade D
≤ 0.20
0.70-1.35
0.035
0.04
0.15-0.50
-
-
Grade E
≤ 0.22
1.15-1.50
0.035
0.04
0.15-0.50
0.04-0.11
-
Mechanical Properties
A633
Yield Strength
Tensile Strength
Elongation 200 mm, min %
Elongation 50 mm, min %
65 mm
65-100 mm
100-150 mm
65 mm
65-100 mm
100-150 mm
Grade A
290
290
-
430-570
430-570
-
18
23
Grade C&D
345
315
-
485-620
450-590
-
18
23
Grade E
415
415
380
550-690
550-690
515-655
18
23
Physical Performance
Physical Performance
Metric
Imperial
Density
7.75 g/cc
0.280 lb/in³
Scope of Application
ASTM A633 steel plate is mainly used in petroleum, chemical, power station, boiler and other industries, for the production of reactors, heat exchangers, separators, spherical tanks, oil and gas pipelines, liquefied gas tanks, shell nuclear reactor pressure, boiler drums, liquefied petroleum gas cylinders, high pressure water pipes, water turbines and other equipment and components.
-
A633 Carbon Steel Coil - Stock Warehouse
-
A633 Carbon Steel Coil - Product Inspection
Tensile Strength Testing Tensile Strength Testing Physical Performance Testing Chemical Composition Testing 
Inspection Hardness Testing Spectral Detection Mechanical Properties -
A633 Carbon Steel Coil - Product Measurement
Width Measurement Length Measurement Thickness Measurement Thickness Measurement 
Measurement Measurement Measurement Measurement -
A633 Carbon Steel Coil - Product Packaging
Jiuzhou Metal
Your reliable steel supplier
Jiuzhou Metal has 10+ warehouses with ready stock. The annual supply capacity is approximately 10 million tons. It has 10 years of experience in large-scale project supply. The customer reorder rate reaches 86%. We ensure quality and quantity, provide material certificates, and will refund if the products are not qualified, so please be assured the purchase.
Get A Quote
3D Virtual Pavilion
Douyin Official Media
Flagship Micro Mall
WeChat Public Number
CONTACT US
Email : enquiry@jiuzhoumetal.com
Mobile: +86-15966669999
Wechat: +86-15966669999
Whatsapp: +86-15966669999
Tel : +86-531-86888888
Address : China Resources Land Plaza, Lixia District, Jinan City, Shandong Province