PRODUCT

return

PRODUCTS

return

Carbon Steel

return

Carbon Steel Plate
Common Grades: A36/S235JR/A283/A514/A572/S355JR/A709/A285/A387/A515 etc.

Wear Steel Plate
Wear Steel Plate Common Grades：NM260, NM300, NM360,NM350, NM400, NM450, NM500, NM550, NM600, etc.

Carbon Steel Coil
Common Grades: A36/S235JR/A283/A514/A572/S355JR/A709/A285/A387/A515 etc.

Carbon Steel Pipe
Common Grades: A53/A106/API Spec 5L/A179/A213//A335/SSAW etc.

Carbon Steel Bar
Common Grades: A36/S355JR/1018/1025/4130/EN8 etc.

Steel Rebar
Steel bars are steel used for reinforced concrete and prestressed reinforced concrete.

Wire Rod
Wire rod is a round steel with a relatively small diameter, commonly used for making steel reinforcement sleeves.

Forging Steel
Forging steel possesses excellent strength, toughness, and ductility, making it ideal for shaping and forming applications.

Stainless Steel

return

Stainless Steel Plate
Stainless steel plates can be divided into austenitic stainless steel, ferritic stainless steel, martensitic stainless steel, duplex stainless steel, etc. The most common ones are 201, 201L, 301, 304, 304L, 316, 316L, 409 etc

Stainless Steel Coil
Stainless steel coils can be divided into austenitic stainless steel, ferritic stainless steel, martensitic stainless steel, duplex stainless steel, etc. The most common ones are 201, 201L, 301, 304, 304L, 316, 316L, 409 etc.

Stainless Steel Pipe
Stainless steel pipes are important products in the steel industry and can be widely used in daily decoration and industrial fields. Many people in the market use it to make staircase handrails, window balustrades, railings.

Stainless Steel Bar
Stainless steel rods can be divided into round steel, square steel, flat steel, hexagonal steel, and octagonal steel according to their shape. Common materials: 304, 304L, 321, 316, 316L, 310S, 630, etc.

Galvanized/PPGI/PPGL

return

Color Coated Plate
Color coated board is made from metal sheets as the substrate, coated or laminated with various organic coatings or plastic films on the surface, and can be divided into PPGI and PPGL.

Color Coated Coil
Color coated rolls are lightweight, aesthetically pleasing, and have good corrosion resistance. They can also be directly processed and are generally classified into gray white, navy blue, brick red, and other colors.

Galvanized Steel Sheet
Galvanized steel plate is coated with a layer of metal zinc to prevent corrosion on the surface of the steel plate and extend its service life. It is divided into hot-dip galvanizing and electrogalvanizing.

Galvanized Steel Coil
Galvanized coil is made of hot-rolled or cold-rolled steel strip as the substrate, which is divided into hot-dip galvanizing and electrogalvanizing.

Galvalume Steel Sheet
The coating composition of aluminum zinc plated plate is composed of 55% aluminum, 43.4% zinc, and 1.6% silicon in weight ratio, respectively. Aluminum zinc plated steel plate can prevent long-term rusting of the steel plate.

Galvalume Steel Coil
The coating composition of aluminum coated zinc coils is composed of 55% aluminum, 43.4% zinc, and 1.6% silicon in weight ratio, respectively. Aluminum zinc coated steel coils can prevent long-term rusting of the steel coils.

Inconel/Hastelloy/Incoloy/Monel/Titanium

return

Alloy Plate
Alloy plate is a manufacturing material made by mixing two or more metal elements. It is usually used to manufacture various products, including building materials, aerospace components, automotive parts, etc.

Alloy Coil
Alloy coil is a new type of metal material that is composed of a certain proportion of low alloy elements and ordinary steel.The main materials are: Hastelloy, Monel, nickel alloy, titanium alloy, Inconel, Incoloy, etc.

Alloy Pipe
Alloy pipes can be divided into circular pipes, square pipes, rectangular pipes, hexagonal pipes, etc. according to their shape. The main materials are: Hastelloy, Monel, nickel alloy, titanium alloy, Inconel, Incoloy, etc.

Alloy Bar
Alloy rods can be divided into round rods, square rods, hexagonal rods, etc. according to their shape. The main materials are: Hastelloy, Monel, nickel alloy, titanium alloy, Inconel, Incoloy, etc.

Silicon Steel

return

Non-Oriented CRNGO
Non oriented silicon steel is a silicon iron alloy with very low carbon content, and its grains exhibit irregular orientation distribution in the steel plate after deformation and annealing.

Oriented Silicon Steel CRGO
Oriented silicon steel, also known as cold-rolled transformer steel, is an important ferrosilicon alloy used in the transformer (iron core) manufacturing industry.

Aluminum

return

Aluminum Plate
Aluminum plates are generally divided into pure aluminum plates, alloy aluminum plates, thin aluminum plates, medium thick aluminum plates, patterned aluminum plates, etc.

Aluminum Coil
Aluminum coil is a metal product produced by a casting and rolling mill after rolling, bending, and angle machining for flying shear. Aluminum coils are widely used in automobiles, electrical appliances, etc.

Aluminum Pipe
Aluminum pipes include pure aluminum or aluminum alloy aluminum pipes, which can have one or more closed through-holes, uniform wall thickness and cross-sectional area, and are delivered in a straight or rolled shape.

Aluminum Bar
Aluminum rods are made of aluminum alloys with different contents. There are commercial pure and alloy versions. Provide aluminum rods of various grades, types, and specifications.

Copper

return

Copper Plate
Copper plate has good conductivity, thermal conductivity, and plasticity. Therefore, it is widely used in various industries, such as building roofs, vehicle components, printed circuit boards, etc.

Copper Coil
Copper coils are usually relatively thin copper sheets that can be cut into any length according to demand, and have good conductivity, thermal conductivity, and plasticity.

Copper Pipe
Copper pipes have good conductivity and thermal conductivity, strong corrosion resistance, are not easy to oxidize, and are not prone to chemical reactions with some liquid substances, making them easy to bend and shape.

Copper Bar
The surface of the copper rod forms an oxide film and turns rosy red and purple. Good mechanical properties, good hot plasticity, acceptable cold plasticity, good machinability, and corrosion resistance.

Automotive Steel

return

Martensitic Steels
Martensitic (M) steel has very high yield strength (Re) and extremely high tensile strength (Rm). Docol ® Martensitic steel has good deep drawing properties and good edge tensile properties.

Hot Formed Steel
Hot formed steel, the forming process determines the final characteristics of the material. High temperature forming is beneficial for complex structures, as martensitic microstructures are formed after compression hardening.

Duplex Steel
Multiphase steel has higher yield strength and lower work hardening effect. These steels are suitable for applications that require high strength, good bending properties, and tensile flange capabilities.

High Edge Ductile Steel
High edge ductility steel for automobiles, Docol ® HE is a series of new hot rolled advanced high-strength steel with improved edge ductility, suitable for automotive manufacturers facing production technology challenges.

Third Generation Dual Phase Steel
Dual phase steel has good formability relative to strength, but its expansion ability is limited. It has good weldability but is sensitive to heat treatment.

High Strength Low Alloy Steel
The difference between yield strength and tensile strength of high-strength low alloy (HSLA) steel is usually small, as they have excellent bending performance and better precision punching performance.

Tinplated Steel

return

Tinplate Sheet
Tinplate (commonly known as tinplate) refers to a steel plate with a thin layer of metal tin coated on its surface. Tinplate is a steel plate made of low-carbon steel rolled into a thickness of approximately 2mm.

Tinplate Coil
Tinplate roll is a widely used metal material with a thin layer of tin covering its surface. This technology can make ordinary metal sheets have characteristics such as corrosion resistance and oxidation resistance.

Profile

return

H-Beam Steel
H-beam steel is widely used in industrial and civil steel structures, such as beams, load-bearing brackets for industrial structures, and supports for ships, trains, automobiles, conveyor belts, and highway fenders.

Universal Beam (I-Beam)
I-beams can not only be processed through cutting, welding, and other methods, but also be applied in various fields of architecture and structure.

Channel Steel
Channel steel is a long strip steel with a groove shaped cross-section, belonging to the carbon structural steel used for construction and machinery. It is a complex section steel with a groove shaped cross-section.

Angle Steel
Angle steel is mainly divided into two types: equilateral angle steel and unequal angle steel, which are widely used in various building and engineering structures, such as beams, bridges, ships, industrial furnaces, etc.

Steel Piles
Steel sheet pile is a steel structure with a linkage device on the edge, which can be freely combined to form a continuous and compact retaining wall or water retaining wall.

Others

return

Fasteners
Fasteners are a type of mechanical components that are widely used for fastening connections. The characteristic is a wide variety of specifications, with different performance and uses.

Pure Iron
Pure iron is an iron alloy with a carbon content of less than 0.02%, also known as wrought iron. It has low carbon content and low impurity content, therefore it has excellent magnetic properties and high corrosion resistance.

RESOURCES

return

Catalogue

FAQ
MANUFACTURING

return

Manufacturing Process

Production and Testing

Product Inspection Report

Mill Test Report

Inspection Process

Stock Warehouse

Product Packaging

Steel Standards and Grades
PROJECTS

return

Factory and Warehousing

Air and Railway

Venue and Exhibition Hall

Building and Facilities

Petrochemical

Residential and Mall

Water Treatment

Maritime Transport
NEWS

return

JIUZHOU NEWS

return

Company News

Industry News

Exhibitions Info

Shipping News

Jiuzhou Customers
ABOUT US

return

About Jiuzhou

Message from the GM

Organization Structure

Why Choose Us
Contact Us
After-sales Support

Language

After-sales Support

Colombian Shipbuilding Project

Product: 316LN/316L alloy pipe

Quantity: 817 tons

Project location: Colombia

Date: 2014年

Project Story

Shipbuilding is the construction of ships and floating ships. It is usually carried out in a professional facility called a shipyard. We provide 316LN/316L alloy pipes and pipeline coatings.

1

Singapore Shipbuilding Project

South African Ocean Project

3D Virtual Pavilion

Douyin Official Media

Flagship Micro Mall

WeChat Public Number

Email : enquiry@jiuzhoumetal.com

Mobile: +86-15966669999
Wechat: +86-15966669999
Whatsapp: +86-15966669999

Tel : +86-531-86888888

Address : China Resources Land Plaza, Lixia District, Jinan City, Shandong Province

SOCIAL MEDIA

YouTube

Tik Tok

Facebook

Jiuzhou Metal Products (Shandong) Co., Ltd.

www.jiuzhou-metal.com

Tel：+86-159 6666 9999

Email：enquiry@jiuzhoumetal.com

Whatsapp：8615966669999

SAF Coolest v1.3 设置面板XXOSX-ZVJY-HDASE-ZVD

违禁词： First, best, first-class, leading, unique, king, leader, leader, extreme,

SVG图标库请自行添加图标，用div包起来，并命名使用

Consulting Bulk Order Discounts

Jiuzhou Metal is committed to providing the most reliable and satisfactory steel and metal product solutions to global users.

Request A Sample

Jiuzhou Metal is willing to provide free samples to our customers for testing, small quantities of samples are free.Please note that sample shipping costs will be borne by the customer.

Request Customized Solution

The company is committed to providing the most reliable and satisfactory customized supply of steel and metal products to global users.

Get A Quote

Jiuzhou Metal is committed to providing the most reliable and satisfactory steel and metal product solutions to global users.

PRODUCTS

Carbon Steel

Carbon Steel Plate

Wear Steel Plate

Carbon Steel Coil

Carbon Steel Pipe

Carbon Steel Bar

Steel Rebar

Wire Rod

Forging Steel

Stainless Steel

Stainless Steel Plate

Stainless Steel Coil

Stainless Steel Pipe

Stainless Steel Bar

Galvanized/PPGI/PPGL

Color Coated Plate

Color Coated Coil

Galvanized Steel Sheet

Galvanized Steel Coil

Galvalume Steel Sheet

Galvalume Steel Coil

Inconel/Hastelloy/Incoloy/Monel/Titanium

Alloy Plate

Alloy Coil

Alloy Pipe

Alloy Bar

Silicon Steel

Non-Oriented CRNGO

Oriented Silicon Steel CRGO

Aluminum

Aluminum Plate

Aluminum Coil

Aluminum Pipe

Aluminum Bar

Copper

Copper Plate

Copper Coil

Copper Pipe

Copper Bar

Automotive Steel

Martensitic Steels

Hot Formed Steel

Duplex Steel

High Edge Ductile Steel

Third Generation Dual Phase Steel

High Strength Low Alloy Steel

Tinplated Steel

Tinplate Sheet

Tinplate Coil

Profile

H-Beam Steel

Universal Beam (I-Beam)

Channel Steel

Angle Steel

Steel Piles

Others

Fasteners

Pure Iron

RESOURCES

Catalogue

FAQ

Manufacturing Process

Production and Testing

Product Inspection Report

Mill Test Report

Inspection Process

Stock Warehouse

Product Packaging

Steel Standards and Grades

Factory and Warehousing

Air and Railway

Venue and Exhibition Hall

Building and Facilities

Petrochemical

Residential and Mall

Water Treatment

Maritime Transport

JIUZHOU NEWS

Company News